LDraw.org Discussion Forums
Architecture Theme - Printable Version

+- LDraw.org Discussion Forums (https://forums.ldraw.org)
+-- Forum: Models and Parts (https://forums.ldraw.org/forum-18.html)
+--- Forum: Official Models (https://forums.ldraw.org/forum-17.html)
+--- Thread: Architecture Theme (/thread-2020.html)

Pages: 1 2 3 4

Re: Architecture Theme - Damien Roux - 2016-03-06

There is a typo error: !HISOTORY instead of !HISTORY in the file of the OMR.

Re: Architecture Theme - Merlijn Wissink - 2016-03-06

No, there isn't!
Just joking, I've fixed it. Thanks for point it out. Smile

RE: Architecture Theme - Damien Roux - 2016-09-28

Architecture / 21029 - Buckingham Palace

[Image: 29907678241_f83b694044_b.jpg]

OMR Compliant (with unofficial Parts)
Errors: None

RE: Architecture Theme - Damien Roux - 2016-10-03

Architecture / 21030 - United States Capitol Building

[Image: 30082575395_50400d2b51_b.jpg]

OMR Compliant (with unofficial Parts)
Errors: None

21035 - Solomon R. Guggenheim Museum - Philippe Hurbain - 2017-04-13

[Image: 21035.jpg]
Download MPD (OMR compliant)
Known errors: None.
Done with LDCad 1.6 beta 2

RE: Architecture Theme - Damien Roux - 2017-05-07

Architecture / 21035 - Solomon R. Guggenheim Museum

[Image: 34351457232_6dbf3a6e47_b.jpg]

OMR Compliant (with unofficial Parts)
Errors: None

RE: Architecture Theme - Damien Roux - 2017-05-21

Architecture / 21032 - Sydney

[Image: 34762472036_427685593b_b.jpg]

OMR Compliant (with unofficial Parts)
Errors: None

RE: Architecture Theme - Damien Roux - 2017-06-02

Architecture / 21033 - Chicago

[Image: 34608072650_cea62a8c7d_b.jpg]

OMR Compliant (with unofficial Parts)
Errors: None

RE: Architecture Theme - Damien Roux - 2017-07-11

Architecture / 21034 - London

[Image: 35673739472_56901b9c4b_b.jpg]

OMR Compliant (with unofficial Parts)
Errors: None

21043 - San Francisco - Orion Pobursky - 2019-01-31

   

21043 - San Francisco
OMR Compliant (MPD Center says it is not even though all the checks come back true)

RE: 21043 - San Francisco - Orion Pobursky - 2019-01-31

(2019-01-31, 2:53)Orion Pobursky Wrote: 21043 - San Francisco
OMR Compliant (MPD Center says it is not even though all the checks come back true)

So I'll say that this model would have been incredibly frustrating without LDCad. The set bin and flexible part functionally make this build enjoyable. Also, don't import this model directly into Studio. I had to separate the flex object files into their own custom parts for it to load correctly.

RE: 21043 - San Francisco - Orion Pobursky - 2019-01-31

(2019-01-31, 3:01)Orion Pobursky Wrote:
(2019-01-31, 2:53)Orion Pobursky Wrote: 21043 - San Francisco
OMR Compliant (MPD Center says it is not even though all the checks come back true)

So I'll say that this model would have been incredibly frustrating without LDCad. The set bin and flexible part functionally make this build enjoyable. Also, don't import this model directly into Studio. I had to separate the flex object files into their own custom parts for it to load correctly.

I also authored my first new part in years. Another bit of awesomeness sparked by this set.

The real life build of this set was very enjoyable as well.

All in all one of the better Architecture set out there.

RE: 21043 - San Francisco - Steffen - 2019-01-31

great job. I love it.

21036 - Arc de Triomphe - Orion Pobursky - 2019-02-04

   

OMR Compliant.
Missing: 1x8 Tile with Arc de Triomphe

RE: 21036 - Arc de Triomphe - Philippe Hurbain - 2019-02-04

(2019-02-04, 5:22)Orion Pobursky Wrote: Missing: 1x8 Tile with Arc de Triomphe
http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/4162p1b.dat
The least I could do for a French landmark Wink

21042 - Statue of Liberty - Orion Pobursky - 2019-02-19

21042 - Statue of Liberty
   
OMR Complaint
Missing: 1x8 tile with Statue of Liberty
Notes: The angles on the model cause small part overlap. I did my best to minimize this but we may want to look at the hinge part to see if it needs to be adjusted.

21047 - Las Vegas - Orion Pobursky - 2019-02-19

21047 - Las Vegas
   
OMR Complaint
Missing: 1x8 tile with Las Vegas, 1x2 tile with Welcome to Las Vegas sign
Notes: The pharaoh headdress is set to gold, it should be changed to tan when the part is fixed.

21039 - Shanghai - Orion Pobursky - 2019-02-19

21039 - Shanghai
   
OMR Compliant
Missing: 1x8 tile with Shanghai
Notes: There are 4 flex axles inside the core of the rightmost building. I left these out with a place holder note since they are non-visible in the finished model and would add a significant amount to the file size.

RE: Architecture Theme - Orion Pobursky - 2019-02-19

Reply heirarchy on this thread has become messed up somehow. Please post all new posts as a reply to this post.

RE: 21039 - Shanghai - Orion Pobursky - 2019-02-21

(2019-02-19, 16:17)Orion Pobursky Wrote: 21039 - Shanghai

OMR Compliant (yet)
Missing: 1x8 tile with Shanghai
Notes: There are 4 flex axles inside the core of the rightmost building. I left these out with a place holder note since they are non-visible in the finished model and would add a significant amount to the file size.

The above 3 Models are now OMR compliant and have renders.

21041 - Great Wall of China - Orion Pobursky - 2019-02-24

21041 - Great Wall of China
   
OMR Compliant
Missing: 1x8 tile with Great Wall of China or 长城

21037 - LEGO House - Orion Pobursky - 2019-05-27

   

21037 - LEGO House
OMR Compliant
Missing: 1x8 Tile with text LEGO House
Notes: Authored in Billund

RE: 21037 - LEGO House - Philippe Hurbain - 2019-05-28

(2019-05-27, 3:02)Orion Pobursky Wrote: 21037 - LEGO House
OMR Compliant
Missing: 1x8 Tile with text LEGO House
Notes: Authored in Billund
Hi Orion... Tile of interest Wink   http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/4162p1c.dat

RE: 21037 - LEGO House - Johann Eisner - 2019-05-30

(2019-05-28, 13:30)Philippe Hurbain Wrote: Hi Orion... Tile of interest Wink   http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/4162p1c.dat

Import the tile to the model and upload it to the OMR.
http://omr.ldraw.org/files/1151

21046 - Empire State Building - Orion Pobursky - 2019-08-02

21046 - Empire State Building
   
OMR Compliant
Missing: Nothing

21045 - Trafalgar Square - Orion Pobursky - 2019-08-02

21045 - Trafalgar Square
   
OMR Compliant
Missing:
Tile 1 x 1 with Rainbow, Sand Red, Yellow, Dark Azure, Medium Blue, Dark Purple
Tile 1 x 1 with Rainbow, Sand Red, Yellow, Dark Azure, Medium Blue, Dark Purple, Cloud
Tile 1 x 1 with Swirl, Van Gogh Painting
Tile 1 x 1 with Unicorn Painting
Tile 2 x 2 with Colored Kitten with Party Hat

21052 - Dubai - Orion Pobursky - 2020-01-10

21052 - Dubai
   
OMR Compliant
Missing: Tile 1x8 with Dubai
Notes: The flexaxles in this model look funky. I haven't built the real model yet so I can't say if that's just the way they look

20151 - Tokyo - Orion Pobursky - 2020-01-27

21051 - Tokyo

   

OMR Compliant: Yes
Missing: Nothing
Notes: Lots of new (or rarely used) patterns in this set. I had to author 5 (!) patterns and 2 where done by other authors

RE: 21052 - Dubai - Gerald Lasser - 2020-01-27

(2020-01-10, 1:58)Orion Pobursky Wrote: Notes: The flexaxles in this model look funky. I haven't built the real model yet so I can't say if that's just the way they look


You are right, they do look strange also when the model is build "legally" (left). I did not like it this way, so I move the clips a bit which makes it look much more like the real thing (right) If TLG would have used a flexible hose, you could bend it to fit. I am missing the Al Muntaha restaurant, a horizontal bar looking towards the sea and I would have preferred the Emirates towers also a bit darker, LGB.
But overall, I like the model, nice building techniques, especially on the Burj Al Arab.

   

RE: 20151 - Tokyo - Orion Pobursky - 2020-02-03

Updated with OMR compliance and render

RE: 21003 Seattle Space Needle - N. W. Perry - 2020-02-13

21003 - Seattle Space Needle

This is an alternate version using LDCad flexible elements, optimized for rendering in Studio. The flexible elements are as close to the correct length as I could get (133mm according to instructions, 133.11mm here).

Because this model already appears in the OMR, no attempt at OMR compliance was made.

   

.ldr   21003 Seattle Space Needle.ldr (Size: 82.55 KB / Downloads: 7)

RE: 21003 Seattle Space Needle - Orion Pobursky - 2020-03-01

Awesome, I updated the file on the OMR with your hoses and added a HISTORY line.

RE: Architecture Theme - N. W. Perry - 2020-03-11

(2016-02-14, 17:03)Damien Roux Wrote: Architecture / 21015 - The Leaning Tower Of Pisa

In case anyone's curious, the Lego (or at least LDraw) version of this tower tilts at an angle of 5.39753 degrees, close to the real tower's historical maximum of 5.5 degrees, but rather more than its current tilt of just under 4 degrees.  Big Grin

RE: Architecture Theme - N. W. Perry - 2020-03-30

(2016-02-14, 17:06)Damien Roux Wrote: Architecture / 21019 - The Eiffel Tower

This is an alternate version with the flex axles adapted for correct photoreal rendering in Studio. (I have opted for the corresponding "flat silver" rubber color on the axles.) EDIT: On further investigation, that may not be the right choice. The real part has a distinct sheen that's not well represented by the rubber color, at least in this renderer. I will update the file to revert to color 179.
   

OMR compliant: Yes, with all unofficial donor parts inlined. (The image shows the alternate French nameplate; in the model, the English version is used.)
Done with LDCad 1.6c, rendered in Studio 2.1.3 (4)

.mpd   21019 - The Eiffel Tower.mpd (Size: 74.26 KB / Downloads: 7)

RE: Architecture Theme - N. W. Perry - 2020-04-21

By the way, what's the general feeling about submitting our own versions of models that already appear in the OMR? Is there any interest in having multiple versions, or is it intended to only hold a single copy of each official model?

I've been going through and building the entire Architecture theme myself, just because I like to. Smile I don't mind sharing what I've built, but I'm also just as happy not to bother OMRizing them if there's no need.

RE: Architecture Theme - N. W. Perry - 2020-05-18

21038 – Las Vegas
(Original, unreleased version featuring Mandalay Bay hotel)

This was made using Tom Alphin's instructions, based on a real copy of the official set, with some corrections.

   

.mpd   21038 - Las Vegas.mpd (Size: 554.32 KB / Downloads: 14)

OMR compliant: Yes
Missing: None
Errors: None*
Done with LDCad 1.6d

*Note: You must use the inlined subparts for the Egyptian headdress in LDCad. Otherwise, it will display the older official pattern subpart with hard-colored Dark Blue stripes instead of the correct Medium Blue.

RE: 21041 - Great Wall of China - N. W. Perry - 2020-05-25

(2019-02-24, 4:35)Orion Pobursky Wrote: 21041 - Great Wall of China

OMR Compliant
Missing: 1x8 tile with Great Wall of China or 长城

The Chinese language version is now on PT:
https://www.ldraw.org/cgi-bin/ptdetail.cgi?s=4162p1l.dat

RE: 21047 - Las Vegas - N. W. Perry - 2020-05-25

(2019-02-19, 16:13)Orion Pobursky Wrote: 21047 - Las Vegas

OMR Complaint
Missing: 1x8 tile with Las Vegas, 1x2 tile with Welcome to Las Vegas sign
Notes: The pharaoh headdress is set to gold, it should be changed to tan when the part is fixed.

The 1x2 tile is now on PT:
https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/3069bpt7.dat

RE: 21047 - Las Vegas - Magnus Forsberg - 2020-05-25

And the Pharaoh headdress is fixed, on the PartTracker.

21054 - The White House - Orion Pobursky - 2020-06-04

Sneak peek. Still need to finish the West Wing and make the new label tile (this model omits the word "The").
   

Edit: Also need to make the U.S. Flag tile

RE: 21054 - The White House - Willy Tschager - 2020-06-04

This is the last set in the world I would build right now.



w.

RE: 21054 - The White House - Philippe Hurbain - 2020-06-04

(2020-06-04, 7:43)Willy Tschager Wrote: This is the last set in the world I would build right now.
Not even for the pleasure of dismantling it brick by brick in the end??? Big Grin

RE: 21054 - The White House - Orion Pobursky - 2020-06-04

For me, it's a symbol of what my country is supposed to stand for and not it's current occupant.

RE: 21054 - The White House - Philippe Hurbain - 2020-06-04

(2020-06-04, 12:45)Orion Pobursky Wrote: For me, it's a symbol of what my country is supposed to stand for and not it's current occupant.
Can't agree more... A house is not responsible for its inhabitants behaviour!

RE: 21054 - The White House - Orion Pobursky - 2020-06-04

(2020-06-04, 13:07)Philippe Hurbain Wrote: Can't agree more... A house is not responsible for its inhabitants behaviour!

Don't get me started. The LDraw forums are not the right place and this is not the right thread. If you've been following my Facebook posts, you know how I feel.

21054 - White House - Orion Pobursky - 2020-06-05

21054 - White House
   
OMR Compliant
Missing: Nothing
Note: This building is a symbol, much like the Eiffel Tower or Buckingham Palace. If you must post about current political events please do so in Off Topic. Any replies in that vein will be moved there.

RE: 21054 - The White House - N. W. Perry - 2020-06-07

(2020-06-04, 1:19)Orion Pobursky Wrote: Sneak peek. Still need to finish the West Wing and make the new label tile (this model omits the word "The").


Edit: Also need to make the U.S. Flag tile

So with that done, if I'm not mistaken, the only gap in the OMR is 21044 Paris, and the last part needed to complete the theme is the curved windscreen for the Eiffel Tower? I think that would call for a celebration! Cool

RE: 21054 - The White House - Orion Pobursky - 2020-06-07

(2020-06-07, 5:16)N. W. Perry Wrote: So with that done, if I'm not mistaken, the only gap in the OMR is 20144 Paris, and the last part needed to complete the theme is the curved windscreen for the Eiffel Tower? I think that would call for a celebration! Cool

Aside from the aforementioned one, are there any patterned part we're missing?

RE: 21054 - The White House - N. W. Perry - 2020-06-07

(2020-06-07, 5:19)Orion Pobursky Wrote: Aside from the aforementioned one, are there any patterned part we're missing?

I don't think so. We're all caught up with the nameplates, looks like you finished up what was missing from Tokyo…and everything from Trafalgar Square got done as well (but we're waiting on a new color for two of those parts).

I'll have the Paris model done before long, at least without the arches under the Eiffel Tower. :-( (I don't know why they couldn't just keep the flex axles instead…)

RE: 21054 - The White House - Vincent Messenet - 2020-06-07

(2020-06-07, 5:55)N. W. Perry Wrote: I don't think so. We're all caught up with the nameplates, looks like you finished up what was missing from Tokyo…and everything from Trafalgar Square got done as well (but we're waiting on a new color for two of those parts).

I'll have the Paris model done before long, at least without the arches under the Eiffel Tower. :-( (I don't know why they couldn't just keep the flex axles instead…)

I checked as well and did not find any other missing pattern.