LDraw.org Discussion Forums

Full Version: New Parts for LGEO Library
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Hi all,

As suggested in the Eurobricks forum thread I decided to share my personnal LGEO library.

Last Version:

   - LGEO Library - Darats  - 2019/07/03
   - LGEO.xml - Darats  - 2019/07/03


My library is a bit different from the original LGEO one:
I have usually 2 files per part :

   - lg_xxxx.inc (LGEO file containing Patterns and Studs)
   - xxxx.inc (High quality STL file converted into PovRay format)

While waiting for a better solution, you will need to add :
#declare L3LDrawToLgeo = transform { matrix <0,-LG_BRICK_WIDTH/20,0, 0,0,-LG_BRICK_HEIGHT/24, -LG_BRICK_WIDTH/20,0,0, 0,0,4*LG_BRICK_HEIGHT/24> }
#declare L3LgeoToLDraw = transform { matrix <0,0,-20/LG_BRICK_WIDTH, -20/LG_BRICK_WIDTH,0,0, 0,-24/LG_BRICK_HEIGHT,0, 0,0,0> }

at the end of your lg_defs.inc file (just above the very last "}") or use my own lg_defs.inc provided in the package (but it might conflict with Owen's one on some parts).


You may want to put the lg_xxxx.inc files in your usual LGEO directory and the xxxx.inc files in another folder (don't forget to declare it in PovRay or it will not find the requested files)
There is a high probability that some Parts already exist in the Official LGEO library or other users-made ones. Be aware of it if you overwrite some file.

You need to put LGEO.xml in your Ldview install directory (be aware that you will overwrite your own file that might have parts that mine doesn't have).
Be carful: this xml file might give errors until I fully release all the parts that are in it (should be a matter of a few weeks).

When colors are needed (for Patterns for instance) it uses Ldview exported material format (LDXColorx).
My package doesn't contains lg_color.inc, but it must be accessible by PovRay.


I'm sharing all my xxxx.inc files, but as I'm currently cleaning the lg_xxxx.inc files, I will make regular release of them (so during that time, there will be xxxx.inc files without lg_xxxx.inc files (so not usable) but I will do my best to release everything fast).

The unpacked archive will be more than 1.5 Gb because of the high quality STL files, don't be feared of that, but make sure that you have enough hard drive space for it.


Do not hesitate to test it, ask questions and give me feedback here, it works on my system but I don't know if it will in others.
Is the lgeo.xml based on Owen's version? May I mix the original library, Owen's updates and yours together. May I use them for the AIOI?

w.
My lgeo.xml was based on Owen's one I guess, but might not be up to date.
The one I'm currently sharing has my around 500 personnal LGEO parts in it, but as I'm cleaning the lg files one by one, I would say that my xml file will not be completely usable until I finish to release everything. Should be a matter of one or two weeks. I will make regular updates on the Eurobricks forum.

When everything will be done, I think yes, you could add it to the AIOI if the file size is OK. But before I need testers to make sure the parts are compatible with other computers.
I will give the updates here :

You can download the files by clicking the links on the first topic.


Update: 2015/04/27

[Image: v1-1.jpg]

69 - Tap 1 x 2 Base
70 - Tap 1 x 2 Spout
79 - Technic Ribbed Hose End Segment
80 - Technic Ribbed Hose Mid Segment
104 - Antenna 6H
112 - Car Air Horn
122c01 - Plate 2 x 2 with Red Wheels
122c02 - Plate 2 x 2 with White Wheels
287 - Minifig Suitcase Male Half
288 - Minifig Suitcase Female Half
412 - Arm Piece Turned with 2 and 3 Fingers
481 - Hinge Arm Locking with Single Finger and Axlehole
482 - Hinge Arm Locking with Dual Finger and Axlehole
556 - Fabuland Shovel
577b - Minifig Lightsaber Hilt with Bottom Ring
752 - Hose Flexible End 1 x 1 x 0.667 without Tabs
755 - Hose Flexible Segment End Section
756 - Hose Flexible Segment Center Section
792 - Brick 2 x 2 Arm Holder Lower Part
793 - Brick 2 x 2 Arm Holder Upper Part with Hole
794 - Brick 2 x 2 Arm Holder Upper Part without Hole
795 - Arm Piece with Disc and 2 Fingers
902 - Electric Light Reflector Round 2 x 2 x 0.667
905 - Electric Light & Sound Computer Console Base
905c01 - Electric Light & Sound Computer Console (Complete)
906 - Electric Light & Sound Computer Screen Pattern
Update: 2015/04/28

[Image: v2-1.jpg]

973 - Minifig Torso
973p1u - Minifig Torso with Zipper Jacket and 3 Pockets Pattern
973p04 - Minifig Torso with Six Button Suit and Airplane Pattern
973p6a - Minifig Torso with Space Police II Chief Pattern
973p6b - Minifig Torso with Black Futuron Pattern
973p6c - Minifig Torso with Blue Futuron Pattern
973p6d - Minifig Torso with Red Futuron Pattern
973p6e - Minifig Torso with Yellow Futuron Pattern
973p28 - Minifig Torso with Leather Jacket Pattern
973p51 - Minifig Torso with Blacktron II Pattern
973p52 - Minifig Torso with Blacktron I Pattern
973p68 - Minifig Torso with M Tron Logo Pattern
973p69 - Minifig Torso with Space Police II and Radio Pattern
973p73 - Minifig Torso with Vest with Patch Pockets Pattern
973p90 - Minifig Torso with Classic Space Pattern
973pst - Minifig Torso with Black Collar and Pockets Pattern
Update: 2015/04/28

[Image: v2-2.jpg]

993 - Electric Cable 3 LDU Twin
2335 - Flag 2 x 2
2335ps2 - Flag 2 x 2 with SW Mini AT-ST Pattern
2336p35 - Wedge 2 x 3 with Brick 2 x 4 with Black/Silver "V" Pattern
2336p36 - Wedge 2 x 3 with Brick 2 x 4 with Red/Silver "V" Pattern
2336p68 - Wedge 2 x 3 with Brick 2 x 4 with M Tron Logo Pattern
2336p90 - Wedge 2 x 3 with Brick 2 x 4 with Classic Space Logo Pattern
2340 - Tail 4 x 1 x 3
2346 - Tyre 12/50 x 16 Offset Tread
2348a - Glass for Hinge Car Roof 4 x 4 Sunroof without Ridges
2348b - Glass for Hinge Car Roof 4 x 4 Sunroof with Ridges
2349a - Hinge Car Roof 4 x 4 Sunroof without Ledges
2362ap53 - Panel 1 x 2 x 3 with Space Police I Left Pattern
2362ap54 - Panel 1 x 2 x 3 with Space Police I Right Pattern
2377 - Window 1 x 2 x 2 Plane
2408 - Panel 10 x 6 x 11
2408p01 - Panel 10 x 6 x 11 with Blacktron II Logo Pattern
2408p02 - Panel 10 x 6 x 11 with Blacktron I Logo Pattern
2408p04 - Panel 10 x 6 x 11 with Futuron Stripes Pattern
2408p05 - Panel 10 x 6 x 11 with "200" Pattern
Update: 2015/04/28

[Image: v2-3.jpg]

2409: Panel 10 x 10 x 12 Corner
2412a: Tile 1 x 2 Grille without Groove
2412b: Tile 1 x 2 Grille with Groove
2418a: Windscreen 6 x 6 Octagonal Canopy without Axlehole
2418b: Windscreen 6 x 6 Octagonal Canopy with Axlehole
2422: Bracket 2 x 2 - 1 x 4
2425: Rack Winder 2 x 4 x 2 Top
2426: Rack Winder 2 x 4 x 2 Underside Right Side
2426c01: Rack Winder 2 x 4 x 2 without Axle
2426c02: Rack Winder 2 x 4 x 2 with Axle
2427: Rack Winder 2 x 4 x 2 Underside Left Side
2428: Rack 1 x 20
2431pk0: Tile 1 x 4 with Teeth Pattern
2431pk1: Tile 1 x 4 with Black and Yellow Diagonal Stripes and Tow Rings
2436: Bracket 1 x 2 - 1 x 4 with Square Corners
2440: Hinge 6 x 3 Radar/Blade/Spoiler/Panel
2440p69: Hinge 6 x 3 Radar/Blade/Spoiler/Panel with Radar Pattern
2443: Hinge Windows Frame 1 x 4 x 3 with Octogonal Panel
2446: Minifig Helmet Modern
2447: Minifig Helmet Visor
Update: 2015/04/28

[Image: v2-4.jpg]

2448: Panel 3 x 2 x 5 & 2/3
2463: Brick 3 x 3 x 2 Facet Top
2464: Brick 3 x 3 x 2 Facet Bottom
2466: Panel 3 x 2 x 6
2466p07: Panel 3 x 2 x 6 with Black Grille Pattern
2466p68: Panel 3 x 2 x 6 with M Tron Logo Pattern
2467: Panel 4 x 4 x 6 Corner Concave
2468: Panel 3 x 3 x 6 Corner Convex
Just FYI, none of your Dropbox picture links work, either here or on EuroBricks. It seems like perhaps they're not public URLs.
I have the problem on my ipad, but they do work on my PC, need to investigate....
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24