https://forums.ldraw.org/ Mon, 01 Jun 2026 19:46:51 +0000 MyBB https://forums.ldraw.org/thread-29524.html Mon, 25 May 2026 20:25:03 +0000 tom alphin]]> https://forums.ldraw.org/thread-29524.html I just wanted to let folks know that I am locking-down the parts included in my upcoming LEGO Parts Guide print edition.  I have had good luck getting help filling in the gaps in the past by creating a fresh thread highlighting those parts which are missing. I'm also including links to the raw meshes where possible... I hope this makes it easier to port those parts into the official LDraw format!

There are three categories of missing parts:
1. New for 2026
2. Highest Priority Parts (2021-2025)
3. Common but lower priority (2021-2025)


I am most interested in the first two groups, because those parts represent real gaps in a guide to the most common parts - if the part isn't in the guide, people might not consider using the part when building MOCs.

---

New for 2026 - Rankings based on most common parts for sets released (so far) in 2026 alone.  These are the 'freshest' parts so-to-speak.

#900 - Part 7776 - Wave / Lightning 5 x 6 with Axle Hole >> DAT NOT AVAILABLE
#1023 - Part 7207 - Wheel Arch, Mudguard 8 x 4 x 1 >> DAT NOT AVAILABLE
#1232 - Part 5805 - Wheel 8 x 7.2 with Pin Hole >> http://www.digital-bricks.de/en/file.php?part=5805
#1236 - Part 7840 - Headwear Accessory Hat with Small Pin, Stetson >> DAT NOT AVAILABLE

---

Highest Priority Parts (2021-2025) - These are both very common and very useful parts for MOC-building across a wide range of themes.

#1436 - Part 80487 - Spider Web, Dome Shaped with Bar. - Increasingly common. >> https://heartlake.city/dat/80487.dat
#1594 - Part 65184 - Weapon Sword, Blade with Bar, Single Edge - http://www.digital-bricks.de/en/file.php?part=65184
#1659 - Part 4986 - Large Figure Cover 4 x 5 x 2 with Bar, 4 Studs, Ridged >> https://heartlake.city/dat/4986.dat
#1694 - Part 80017 - Creature Body Part, Dragon Head Lower Jaw with Pointy Chin >> https://heartlake.city/dat/80017.dat
#1772 - Part 75522 - Fairing, Motorcycle, Dirt Bike with 1 x 2 Studs >> https://heartlake.city/dat/75522.dat
#1773 - Part 78611 - Rubber Raft / Dinghy 6 x 12 >> https://heartlake.city/dat/78611.dat
#1792 - Part 24184 - Minidoll Life Jacket >> http://www.digital-bricks.de/en/file.php?part=24184
#1852 - Part 49418 - Dinosaur, Dilophosaurus / Gallimimus Lower Jaw with Teeth >> http://www.digital-bricks.de/en/file.php?part=49418
#1993 - Part 5978 - Creature Body Part, Dragon, Tail >> https://heartlake.city/dat/5978.dat
#1959 - Part 5033 - Tyre 24 x 9.9 >> https://heartlake.city/dat/5033.dat
#1990 - Part 65521 - Fairing, Motorcycle Frame, Vintage  >> http://www.digital-bricks.de/en/file.php?part=65521
#2015 - Part 67243 - Aircraft Fuselage Curved Forward 8 x 12 x 2 Bottom >> http://www.digital-bricks.de/en/file.php?part=67243

---

Common but lower priority (2021-2025) - These parts are numerically common, but niche in use or appear to be retired already.

#1195 - Part 78169 - Tile Remover Key Diamond >> https://heartlake.city/dat/78169.dat
#1338 - Part 70682 - Vehicle Body, Motorcycle / Quadricycle Frame. >> https://heartlake.city/dat/70682.dat
#1748 - Part 69871 - Tile Remover Key, Heart >> https://heartlake.city/dat/69871.dat
#1862 - Part 56823c50 - String Cord Thin (0.5mm) 50cm -- DAT NOT AVAILABLE. Just use LSynth?
#1894 - Part 76923 - Dragon Head Lower Jaw with 6 Studs on Top, Spike, Teeth -- DAT NOT AVAILABLE
#1896 - Part 86125b - Throwing Star / Shuriken, Curved Blades - 2022 only. >> https://heartlake.city/dat/1018774.dat
#1898 - Part 73766a - Throwing Star / Shuriken with Trailing Effect -2021 only. >> https://heartlake.city/dat/1011309.dat
#1924 - Part 5435 - Energy Effect, Spiked Dragon for Spinner >> https://heartlake.city/dat/5435.dat
#1954 + #1978 - Part 69869c02 & c01 - Vehicle Base, Motorcycle Chassis with Flywheel >> https://heartlake.city/dat/69869.zip
#1965 - Part 2186b - Bone Shuriken >> https://heartlake.city/dat/2186.zip

---

Thanks again for all of the hard work bringing these meshes into LDraw standard.  I am impressed by the high-quality output when the part images are exported for use in my guide!

---Tom Alphin]]> I just wanted to let folks know that I am locking-down the parts included in my upcoming LEGO Parts Guide print edition.  I have had good luck getting help filling in the gaps in the past by creating a fresh thread highlighting those parts which are missing. I'm also including links to the raw meshes where possible... I hope this makes it easier to port those parts into the official LDraw format!

There are three categories of missing parts:
1. New for 2026
2. Highest Priority Parts (2021-2025)
3. Common but lower priority (2021-2025)


I am most interested in the first two groups, because those parts represent real gaps in a guide to the most common parts - if the part isn't in the guide, people might not consider using the part when building MOCs.

---

New for 2026 - Rankings based on most common parts for sets released (so far) in 2026 alone.  These are the 'freshest' parts so-to-speak.

#900 - Part 7776 - Wave / Lightning 5 x 6 with Axle Hole >> DAT NOT AVAILABLE
#1023 - Part 7207 - Wheel Arch, Mudguard 8 x 4 x 1 >> DAT NOT AVAILABLE
#1232 - Part 5805 - Wheel 8 x 7.2 with Pin Hole >> http://www.digital-bricks.de/en/file.php?part=5805
#1236 - Part 7840 - Headwear Accessory Hat with Small Pin, Stetson >> DAT NOT AVAILABLE

---

Highest Priority Parts (2021-2025) - These are both very common and very useful parts for MOC-building across a wide range of themes.

#1436 - Part 80487 - Spider Web, Dome Shaped with Bar. - Increasingly common. >> https://heartlake.city/dat/80487.dat
#1594 - Part 65184 - Weapon Sword, Blade with Bar, Single Edge - http://www.digital-bricks.de/en/file.php?part=65184
#1659 - Part 4986 - Large Figure Cover 4 x 5 x 2 with Bar, 4 Studs, Ridged >> https://heartlake.city/dat/4986.dat
#1694 - Part 80017 - Creature Body Part, Dragon Head Lower Jaw with Pointy Chin >> https://heartlake.city/dat/80017.dat
#1772 - Part 75522 - Fairing, Motorcycle, Dirt Bike with 1 x 2 Studs >> https://heartlake.city/dat/75522.dat
#1773 - Part 78611 - Rubber Raft / Dinghy 6 x 12 >> https://heartlake.city/dat/78611.dat
#1792 - Part 24184 - Minidoll Life Jacket >> http://www.digital-bricks.de/en/file.php?part=24184
#1852 - Part 49418 - Dinosaur, Dilophosaurus / Gallimimus Lower Jaw with Teeth >> http://www.digital-bricks.de/en/file.php?part=49418
#1993 - Part 5978 - Creature Body Part, Dragon, Tail >> https://heartlake.city/dat/5978.dat
#1959 - Part 5033 - Tyre 24 x 9.9 >> https://heartlake.city/dat/5033.dat
#1990 - Part 65521 - Fairing, Motorcycle Frame, Vintage  >> http://www.digital-bricks.de/en/file.php?part=65521
#2015 - Part 67243 - Aircraft Fuselage Curved Forward 8 x 12 x 2 Bottom >> http://www.digital-bricks.de/en/file.php?part=67243

---

Common but lower priority (2021-2025) - These parts are numerically common, but niche in use or appear to be retired already.

#1195 - Part 78169 - Tile Remover Key Diamond >> https://heartlake.city/dat/78169.dat
#1338 - Part 70682 - Vehicle Body, Motorcycle / Quadricycle Frame. >> https://heartlake.city/dat/70682.dat
#1748 - Part 69871 - Tile Remover Key, Heart >> https://heartlake.city/dat/69871.dat
#1862 - Part 56823c50 - String Cord Thin (0.5mm) 50cm -- DAT NOT AVAILABLE. Just use LSynth?
#1894 - Part 76923 - Dragon Head Lower Jaw with 6 Studs on Top, Spike, Teeth -- DAT NOT AVAILABLE
#1896 - Part 86125b - Throwing Star / Shuriken, Curved Blades - 2022 only. >> https://heartlake.city/dat/1018774.dat
#1898 - Part 73766a - Throwing Star / Shuriken with Trailing Effect -2021 only. >> https://heartlake.city/dat/1011309.dat
#1924 - Part 5435 - Energy Effect, Spiked Dragon for Spinner >> https://heartlake.city/dat/5435.dat
#1954 + #1978 - Part 69869c02 & c01 - Vehicle Base, Motorcycle Chassis with Flywheel >> https://heartlake.city/dat/69869.zip
#1965 - Part 2186b - Bone Shuriken >> https://heartlake.city/dat/2186.zip

---

Thanks again for all of the hard work bringing these meshes into LDraw standard.  I am impressed by the high-quality output when the part images are exported for use in my guide!

---Tom Alphin]]> https://forums.ldraw.org/thread-29520.html Sun, 24 May 2026 02:00:35 +0000 Angus]]> https://forums.ldraw.org/thread-29520.html https://forums.ldraw.org/thread-29518.html Fri, 22 May 2026 21:20:28 +0000 Matthew]]> https://forums.ldraw.org/thread-29518.html https://forums.ldraw.org/thread-29517.html Fri, 22 May 2026 21:01:50 +0000 Jankler]]> https://forums.ldraw.org/thread-29517.html
28777

28778

I want to create a digital version of the lego batman movie cast but am missing batgirls cowl and hair, please help

Thank you.]]>
28777

28778

I want to create a digital version of the lego batman movie cast but am missing batgirls cowl and hair, please help

Thank you.]]> https://forums.ldraw.org/thread-29516.html Fri, 22 May 2026 16:18:43 +0000 Pepijn74]]> https://forums.ldraw.org/thread-29516.html https://www.bricklink.com/v2/catalog/cat...78#T=C&C=3

I also can't find it on the LDraw parts list, which I had understood was the next step. Would it be possible for someone to model that part? Many thanks in advance!]]> https://www.bricklink.com/v2/catalog/cat...78#T=C&C=3

I also can't find it on the LDraw parts list, which I had understood was the next step. Would it be possible for someone to model that part? Many thanks in advance!]]> https://forums.ldraw.org/thread-29513.html Fri, 22 May 2026 00:40:50 +0000 john Mccleallan]]> https://forums.ldraw.org/thread-29513.html Part name: Minifigure, Headgear Helmet SW Stormtrooper, Raised Forehead, Imperial Patrol Trooper Pattern

Bricklink reference: 36048pb01

thank you.]]> Part name: Minifigure, Headgear Helmet SW Stormtrooper, Raised Forehead, Imperial Patrol Trooper Pattern

Bricklink reference: 36048pb01

thank you.]]> https://forums.ldraw.org/thread-29512.html Thu, 21 May 2026 22:26:40 +0000 Angus]]> https://forums.ldraw.org/thread-29512.html I need model/file to put into bricklink so I can finish a MOC]]> I need model/file to put into bricklink so I can finish a MOC]]> https://forums.ldraw.org/thread-29511.html Thu, 21 May 2026 12:28:38 +0000 Jeff Jones]]> https://forums.ldraw.org/thread-29511.html
https://rebrickable.com/parts/54255pr000...ick-print/

intrestingly both the ewok wig and the wyvern wing share the same shape 

while it need different formed because it different on each set also the pattern need texmap how would it wrap]]>
https://rebrickable.com/parts/54255pr000...ick-print/

intrestingly both the ewok wig and the wyvern wing share the same shape 

while it need different formed because it different on each set also the pattern need texmap how would it wrap]]> https://forums.ldraw.org/thread-29503.html Mon, 04 May 2026 15:00:17 +0000 Hageta]]> https://forums.ldraw.org/thread-29503.html
Bionicle Cosplayer, Series 29 [Set Inventory]

Required pieces:

• 8041 - Minifigure, Headgear Helmet Mask, Bionicle Hau (Raw Mesh available)
  
• 3626pb4134 - Minifigure, Head Balaclava, Bright Pink Headband...
  
• 973pb6595c01 - Torso Black Collar, Circle, X in Light Bluish Gray Circle...
  
• 970c04pb15 - Hips and Orange Legs with Molded Red Lower Legs...
  
• 3062pb089 - Brick, Round 1 x 1 with 8534-1 Bionicle Toa Tahu Cannister Pattern
  

I tried scanning the pieces with my printer["Scan"] and took pictures of them["Image"].

  Tahu_Image_Canister.jpg (Size: 228.42 KB / Downloads: 1)

  Tahu_Image_Head_Back.jpg (Size: 158.81 KB / Downloads: 0)

  Tahu_Image_Head_Front.jpg (Size: 155.58 KB / Downloads: 0)

  Tahu_Image_Legs.jpg (Size: 145.26 KB / Downloads: 1)

  Tahu_Image_Torso_Back.jpg (Size: 301.18 KB / Downloads: 0)

  Tahu_Image_Torso_Front.jpg (Size: 252.9 KB / Downloads: 0)

  Tahu_Scan_Back.jpg (Size: 56.87 KB / Downloads: 1)

  Tahu_Scan_Canister.jpg (Size: 18.73 KB / Downloads: 269)

  Tahu_Scan_Front.jpg (Size: 52.81 KB / Downloads: 1) ]]>
Bionicle Cosplayer, Series 29 [Set Inventory]

Required pieces:

• 8041 - Minifigure, Headgear Helmet Mask, Bionicle Hau (Raw Mesh available)
  
• 3626pb4134 - Minifigure, Head Balaclava, Bright Pink Headband...
  
• 973pb6595c01 - Torso Black Collar, Circle, X in Light Bluish Gray Circle...
  
• 970c04pb15 - Hips and Orange Legs with Molded Red Lower Legs...
  
• 3062pb089 - Brick, Round 1 x 1 with 8534-1 Bionicle Toa Tahu Cannister Pattern
  

I tried scanning the pieces with my printer["Scan"] and took pictures of them["Image"].

  Tahu_Image_Canister.jpg (Size: 228.42 KB / Downloads: 1)

  Tahu_Image_Head_Back.jpg (Size: 158.81 KB / Downloads: 0)

  Tahu_Image_Head_Front.jpg (Size: 155.58 KB / Downloads: 0)

  Tahu_Image_Legs.jpg (Size: 145.26 KB / Downloads: 1)

  Tahu_Image_Torso_Back.jpg (Size: 301.18 KB / Downloads: 0)

  Tahu_Image_Torso_Front.jpg (Size: 252.9 KB / Downloads: 0)

  Tahu_Scan_Back.jpg (Size: 56.87 KB / Downloads: 1)

  Tahu_Scan_Canister.jpg (Size: 18.73 KB / Downloads: 269)

  Tahu_Scan_Front.jpg (Size: 52.81 KB / Downloads: 1) ]]> https://forums.ldraw.org/thread-29499.html Tue, 28 Apr 2026 06:59:31 +0000 Zoltán Tibor]]> https://forums.ldraw.org/thread-29499.html
I am looking for these Wizard Of Oz minifigures Patterns / Prints (heads, hips, legs, arms and torsos)

Dorothy Gale:

https://www.bricklink.com/catalogItemInv.asp?M=tlm163

Cowardly Lion:

https://www.bricklink.com/catalogItemInv.asp?M=tlm164

Scarecrow:

https://www.bricklink.com/catalogItemInv.asp?M=tlm165

Tin Man:

https://www.bricklink.com/catalogItemInv.asp?M=tlm166

LegoFlying Monkey - Evil Smile:

https://www.bricklink.com/catalogItemInv.asp?M=sh0418a

LegoFlying Monkey - Teeth Bared:

https://www.bricklink.com/catalogItemInv.asp?M=sh0418b

Wicked Witch - I found it here the site! :-)

Thank you very much if you create it! :-)

Best regards.: Zoli

  Lego_Wizard_of_Oz_Minifigures_grande.jpg (Size: 22.26 KB / Downloads: 1) ]]>
I am looking for these Wizard Of Oz minifigures Patterns / Prints (heads, hips, legs, arms and torsos)

Dorothy Gale:

https://www.bricklink.com/catalogItemInv.asp?M=tlm163

Cowardly Lion:

https://www.bricklink.com/catalogItemInv.asp?M=tlm164

Scarecrow:

https://www.bricklink.com/catalogItemInv.asp?M=tlm165

Tin Man:

https://www.bricklink.com/catalogItemInv.asp?M=tlm166

LegoFlying Monkey - Evil Smile:

https://www.bricklink.com/catalogItemInv.asp?M=sh0418a

LegoFlying Monkey - Teeth Bared:

https://www.bricklink.com/catalogItemInv.asp?M=sh0418b

Wicked Witch - I found it here the site! :-)

Thank you very much if you create it! :-)

Best regards.: Zoli

  Lego_Wizard_of_Oz_Minifigures_grande.jpg (Size: 22.26 KB / Downloads: 1) ]]> https://forums.ldraw.org/thread-29493.html Fri, 24 Apr 2026 03:16:31 +0000 the Miner's Cat]]> https://forums.ldraw.org/thread-29493.html that would be really appreciated, thanks.

Additionally, the printed parts from the canister sets are not yet available, either, nor are the canister lids, so those would be nice, too.]]> that would be really appreciated, thanks.

Additionally, the printed parts from the canister sets are not yet available, either, nor are the canister lids, so those would be nice, too.]]> https://forums.ldraw.org/thread-29490.html Wed, 22 Apr 2026 15:21:54 +0000 Jackob]]> https://forums.ldraw.org/thread-29490.html
I'd like to request parts for the Alien Tourist from CMF Series 26 Space. It's a fun figure and I'd love to use it in LDCad/Studio, but none of its parts seem to be in the library yet

The figure has parts that would need to be added:

1. Head: https://www.bricklink.com/v2/catalog/cat...T=S&C=86&O

2. Torso: https://www.bricklink.com/v2/catalog/cat...=3#T=I&C=3

3. hat: https://www.bricklink.com/v2/catalog/cat...9#T=C&C=39

Thanks a lot to anyone who picks this up — I know it's a lot of work and it's all done voluntarily, so it's really appreciated!]]>
I'd like to request parts for the Alien Tourist from CMF Series 26 Space. It's a fun figure and I'd love to use it in LDCad/Studio, but none of its parts seem to be in the library yet

The figure has parts that would need to be added:

1. Head: https://www.bricklink.com/v2/catalog/cat...T=S&C=86&O

2. Torso: https://www.bricklink.com/v2/catalog/cat...=3#T=I&C=3

3. hat: https://www.bricklink.com/v2/catalog/cat...9#T=C&C=39

Thanks a lot to anyone who picks this up — I know it's a lot of work and it's all done voluntarily, so it's really appreciated!]]> https://forums.ldraw.org/thread-29488.html Tue, 21 Apr 2026 08:38:56 +0000 Alfred Schmitz]]> https://forums.ldraw.org/thread-29488.html
To complete my Set 42228 project, I am still missing

... the PRINTED tyres ‘Tyre 81.6 x 44 Slick with White “PIRELLI”, “P ZERO” print’
    (available as a raw mesh file (8266_raw.dat), unfortunately no decent photo found) and

... the PRINTED wheel covers ‘Wheel Cover for Wheel 34 x 56 with Green/Yellow/Red/Blue Circle print’,
    based on Part 4472.dat.
    Image: https://brickonomics.net/sa/element/99536

Thanks in advance and best regards,

Alfred]]>
To complete my Set 42228 project, I am still missing

... the PRINTED tyres ‘Tyre 81.6 x 44 Slick with White “PIRELLI”, “P ZERO” print’
    (available as a raw mesh file (8266_raw.dat), unfortunately no decent photo found) and

... the PRINTED wheel covers ‘Wheel Cover for Wheel 34 x 56 with Green/Yellow/Red/Blue Circle print’,
    based on Part 4472.dat.
    Image: https://brickonomics.net/sa/element/99536

Thanks in advance and best regards,

Alfred]]> https://forums.ldraw.org/thread-29479.html Mon, 13 Apr 2026 11:42:35 +0000 Thore]]> https://forums.ldraw.org/thread-29479.html
can I get some help?

broken links:

Ahsoka (2008):
http://www.digital-bricks.de/de/file.php?part=61195

Shaak Ti (2011):
http://www.digital-bricks.de/de/file.php?part=92745]]>
can I get some help?

broken links:

Ahsoka (2008):
http://www.digital-bricks.de/de/file.php?part=61195

Shaak Ti (2011):
http://www.digital-bricks.de/de/file.php?part=92745]]> https://forums.ldraw.org/thread-29478.html Sat, 11 Apr 2026 23:22:55 +0000 James Simpson]]> https://forums.ldraw.org/thread-29478.html
https://www.bricklink.com/v2/catalog/cat...sh0676#T=I - Red Guardian

https://www.bricklink.com/v2/catalog/cat...h0675&#T=I - 
Black Widow - White Jumpsuit, Dark Orange Mid-Length Hair
 
https://www.bricklink.com/v2/catalog/cat...1&#T=C&C=0 - Sticker Sheet for Set 77905 - (72143/6322976)

Tried looking everywhere for a good version to base designs off]]>
https://www.bricklink.com/v2/catalog/cat...sh0676#T=I - Red Guardian

https://www.bricklink.com/v2/catalog/cat...h0675&#T=I - 
Black Widow - White Jumpsuit, Dark Orange Mid-Length Hair
 
https://www.bricklink.com/v2/catalog/cat...1&#T=C&C=0 - Sticker Sheet for Set 77905 - (72143/6322976)

Tried looking everywhere for a good version to base designs off]]>