Part 32289b modifications and new parts


RE: Part 32289b modifications and new parts
#2
(2020-05-07, 20:11)Javier Orquera Wrote: Hello to all.
First, if this post are wrong placed, move it to the proper place.
 
I made several changes to the part 32289b.dat (that I'm working on), so I attach the files with other numbers and new ones:
1) 32289bs01a.dat: modified with battery form and placeholder to the rear axle
2) u9510a.dat: the idea is to substitute the one in the PT.
3) 13.dat: new file; number and name are with the purpose to identify it, so you can suggest new ones. Also, it is my mane target.
4) 32289b_a: these one have bottom inside to the battery form and the concavity for part 914.dat (I am thinking if leave it as the original submitted or these one; what do you think? Comment)

I decide these before I change the original files in case you dislike the changes and the new parts.

Hi Javier,

* I see you closed the gaps at the pin holes on the very end. Good job!

* The battery box looks good ... I'm not sure if trying to use box primitives wherever you can and on the downside creating T-junctions is the right way.

* Unfortunately this part came with a lot of issues. Please check the overlaps at:

4 4 -46 90.999912232 0 -46 90.315150136 -3.444175152 -60 90.315150136 -3.444175152 -60 90.999912232 0
4 4 -46 90.315150136 -3.444175152 -46 88.36396 -6.36396 -60 88.36396 -6.36396 -60 90.315150136 -3.444175152
4 4 -60 91.000057896 0 -60 90.3149419237 -3.4441060649 -60 89.3910359175 -3.0614197565 -60 90.0000671766 0
4 4 -60 90.3149419237 -3.4441060649 -60 88.363963 -6.363963 -60 87.656856 -5.656856 -60 89.3910359175 -3.0614197565
4 4 -58 89.3912 -3.0616 -58 87.6568 -5.6568 -60 87.6568 -5.6568 -60 89.3912 -3.0616
4 4 -58 87.6568 -5.6568 -58 85.0616 -7.3912 -60 85.0616 -7.3912 -60 87.6568 -5.6568
3 4 -60 89 -8 -60 85.04 -7.36 -60 87.6 -5.6
3 4 -60 89 -8 -60 87.6 -5.6 -60 89 -5.28
3 4 -60 89 -5.28 -56.34 90.28 -3.42 -56.34 90.28 -5.28
4 4 -56.34 90.28 -3.42 -46 90.28 -3.42 -46 90.28 -5.28 -56.34 90.28 -5.28

Also with the edges. As a starting point I would substitute the 1-4cyli.dat with:

1 16 -60 82 0 0 14 0 8.31491 0 3.44415 3.44415 0 -8.31491 1-8cylo.dat
1 16 -60 82 0 0 1 0 .92388 0 .38268 .38268 0 -.92388 1-8ring8.dat

And rebuild the rest accordingly.

* This looks rather strange:

0 BFC INVERTNEXT
1 1 0 80.5 37.7 -10 0 0 0 0 10 0 3.1 0 1-4cylo.dat
1 1 0 80.5 37.7 -10 0 0 0 0 10 0 1 0 1-4ndis.dat
1 1 0 80.5 40.8 -10 0 0 0 0 10 0 -1 0 1-4ndis.dat
1 1 0 80.5 37.7 0 0 -1 1 0 0 0 1 0 1-4ring9.dat
1 1 0 80.5 40.8 0 0 -1 1 0 0 0 -1 0 1-4ring9.dat
1 1 0 80.5 37.7 0 0 -9 9 0 0 0 1 0 1-4edge.dat
0 BFC INVERTNEXT
1 1 0 80.5 52.9 -10 0 0 0 0 10 0 3.1 0 1-4cylo.dat
1 1 0 80.5 52.9 -10 0 0 0 0 10 0 1 0 1-4ndis.dat
1 1 0 80.5 52.9 0 0 -1 1 0 0 0 1 0 1-4ring9.dat

The walls have no "thickness".

w.
LEGO ergo sum
Reply
« Next Oldest | Next Newest »



Messages In This Thread
RE: Part 32289b modifications and new parts - by Willy Tschager - 2020-05-08, 7:01

Forum Jump:


Users browsing this thread: 1 Guest(s)