+- LDraw.org Discussion Forums (https://forums.ldraw.org)
+-- Forum: Models and Parts (https://forums.ldraw.org/forum-18.html)
+--- Forum: Parts Authoring (https://forums.ldraw.org/forum-19.html)
+--- Thread: 7 tooth click hinges (/thread-24436.html)
7 tooth click hinges - Orion Pobursky - 2021-02-15
So it looks like we're going to have to make 7 tooh version of all the click hinge parts a 7 tooth click hinge primitive (primitive already exists):
Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth
Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End, 7 teeth
Hinge Brick 1 x 2 Locking with 2 Fingers Horizontal End, 7 Teeth
Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth
RE: 7 tooth click hinges - Philippe Hurbain - 2021-02-16
(2021-02-15, 19:34)Orion Pobursky Wrote: So it looks like we're going to have to make 7 tooh version of all the click hinge parts a 7 tooth click hinge primitive (primitive already exists):
Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth
Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End, 7 teeth
Hinge Brick 1 x 2 Locking with 2 Fingers Horizontal End, 7 Teeth
Hinge Plate 1 x 2 Locking with 2 Fingers On End, without Groove, 7 Teeth
There are many more...
https://www.ldraw.org/cgi-bin/ptdetail.cgi?s=53914 (already on PT)
https://rebrickable.com/parts/39893/hinge-brick-1-x-2-locking-with-1-finger-vertical-end-and-2-fingers-vertical-end-7-teeth/ Done https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/39893.dat
https://rebrickable.com/parts/50334/hinge-plate-1-x-8-with-angled-side-extensions-7-teeth/
https://rebrickable.com/parts/50337/hinge-plate-3-x-4-locking-dual-2-finger-7-teeth/
https://rebrickable.com/parts/52526/hinge-train-gate-2-x-4-locking-dual-2-fingers-with-7-teeth/
https://rebrickable.com/parts/50340/hinge-plate-1-x-2-locking-with-2-fingers-on-side-7-teeth/
https://rebrickable.com/parts/54661/hinge-brick-1-x-4-locking-with-1-finger-vertical-end-and-2-fingers-vertical-end-with-7-teeth/ Done https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/54661.dat
https://rebrickable.com/parts/54662/hinge-cylinder-1-x-3-locking-with-1-finger-and-2-fingers-on-ends-with-hole-7-teeth/
https://rebrickable.com/parts/57360/hinge-cylinder-1-x-2-locking-with-2-click-fingers-and-axle-hole-7-teeth/
https://rebrickable.com/parts/69320/windscreen-8-x-8-x-3-dome-with-dual-2-fingers-7-teeth/
RE: 7 tooth click hinges - Marc Giraudet - 2022-11-11
(2021-02-16, 9:35)Philippe Hurbain Wrote: There are many more...
https://www.ldraw.org/cgi-bin/ptdetail.cgi?s=53914 (already on PT)
https://rebrickable.com/parts/39893/hinge-brick-1-x-2-locking-with-1-finger-vertical-end-and-2-fingers-vertical-end-7-teeth/ Done https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/39893.dat
https://rebrickable.com/parts/50334/hinge-plate-1-x-8-with-angled-side-extensions-7-teeth/
https://rebrickable.com/parts/50337/hinge-plate-3-x-4-locking-dual-2-finger-7-teeth/
https://rebrickable.com/parts/52526/hinge-train-gate-2-x-4-locking-dual-2-fingers-with-7-teeth/
https://rebrickable.com/parts/50340/hinge-plate-1-x-2-locking-with-2-fingers-on-side-7-teeth/
https://rebrickable.com/parts/54661/hinge-brick-1-x-4-locking-with-1-finger-vertical-end-and-2-fingers-vertical-end-with-7-teeth/ Done https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/54661.dat
https://rebrickable.com/parts/54662/hinge-cylinder-1-x-3-locking-with-1-finger-and-2-fingers-on-ends-with-hole-7-teeth/
https://rebrickable.com/parts/57360/hinge-cylinder-1-x-2-locking-with-2-click-fingers-and-axle-hole-7-teeth/
https://rebrickable.com/parts/69320/windscreen-8-x-8-x-3-dome-with-dual-2-fingers-7-teeth/
50340 official
50337 submitted today.
There is a explaination why other part are not already proposed ?
Maybee a standard description will be decided (teeth or position).
RE: 7 tooth click hinges - Magnus Forsberg - 2022-11-11
(2022-11-11, 14:33)Marc Giraudet Wrote: 50340 official
50337 submitted today.
There is a explaination why other part are not already proposed ?
Maybee a standard description will be decided (teeth or position).
More hinges here:
https://forums.ldraw.org/thread-24154-post-38533.html#pid38533
Maybe we should merge these threads?