LDraw.org Discussion Forums
Part request 4150px21 - Printable Version

+- LDraw.org Discussion Forums (https://forums.ldraw.org)
+-- Forum: Models and Parts (https://forums.ldraw.org/forum-18.html)
+--- Forum: Parts Authoring (https://forums.ldraw.org/forum-19.html)
+--- Thread: Part request 4150px21 (/thread-22936.html)

Part request 4150px21 - Knud Ahrnell Albrechtsen - 2018-09-18

Hi
anyone know if this part has been made??
4150px21

If not, could someone please make it??
I need this for one of my instructions.

Thanks

RE: Part request 4150px21 - Gerald Lasser - 2018-09-18

Does not seem so.

You can check the available patterns with the "Pattern Reference" function of the PT

http://www.ldraw.org/cgi-bin/ptpatterns.cgi?p=4150
http://www.ldraw.org/cgi-bin/ptpatterns.cgi?p=14769

Do you have a hi-res picture?

EDIT: Uh... it has gradients...

RE: Part request 4150px21 - Jaco van der Molen - 2018-09-19

(2018-09-18, 20:43)Gerald Lasser Wrote: Does not seem so.

You can check the available patterns with the "Pattern Reference" function of the PT

http://www.ldraw.org/cgi-bin/ptpatterns.cgi?p=4150
http://www.ldraw.org/cgi-bin/ptpatterns.cgi?p=14769

Do you have a hi-res picture?

EDIT: Uh... it has gradients...

Best done with texture mapping then?
If there is a high res picture or very good photo or scan it can be done.

RE: Part request 4150px21 - Philippe Hurbain - 2018-09-19

(2018-09-19, 8:24)Jaco van der Molen Wrote: [quote pid='29389' dateline='1537303434']
EDIT: Uh... it has gradients...

Best done with texture mapping then?
If there is a high res picture or very good photo or scan it can be done.
[/quote]
Yeah, gradients Sad
And beeing silver printed, not sure that texmap will provide a good result. Anyway, here is a pretty good image I found:
[Image: lego-accessories-minifig-black-tile-roun...se-fan.jpg]

RE: Part request 4150px21 - Jaco van der Molen - 2018-09-19

(2018-09-19, 9:13)Philippe Hurbain Wrote:
(2018-09-19, 8:24)Jaco van der Molen Wrote: [quote pid='29389' dateline='1537303434']
EDIT: Uh... it has gradients...

Best done with texture mapping then?
If there is a high res picture or very good photo or scan it can be done.
Yeah, gradients Sad
And beeing silver printed, not sure that texmap will provide a good result. Anyway, here is a pretty good image I found:

[/quote]

OK, I can try to redraw it in my graphics program (Fireworks).
As you might know and remember it works with vector graphic information but can write bitmap PNG files.
You can use all sorts of lines, colors and gradients to get very good results.
I'll give it a try.

RE: Part request 4150px21 - Jaco van der Molen - 2018-09-19

Jaco van der Molen
[quote pid='29393' dateline='1537350396']
(2018-09-19, 9:13)Philippe Hurbain Wrote: Best done with texture mapping then?
If there is a high res picture or very good photo or scan it can be done.
Yeah, gradients Sad
And beeing silver printed, not sure that texmap will provide a good result. Anyway, here is a pretty good image I found:

[/quote]
Quote:OK, I can try to redraw it in my graphics program (Fireworks).
As you might know and remember it works with vector graphic information but can write bitmap PNG files.
You can use all sorts of lines, colors and gradients to get very good results.
I'll give it a try.

Here is an attempt to approach and mimic the pattern

   

Perhaps this is usable to texture map the part?

RE: Part request 4150px21 - Evert-Jan Boer - 2018-09-19

(2018-09-19, 10:50)Jaco van der Molen Wrote: Jaco van der Molen
[quote pid='29393' dateline='1537350396']
(2018-09-19, 9:13)Philippe Hurbain Wrote: Best done with texture mapping then?
If there is a high res picture or very good photo or scan it can be done.
Yeah, gradients Sad
And beeing silver printed, not sure that texmap will provide a good result. Anyway, here is a pretty good image I found:
Quote:OK, I can try to redraw it in my graphics program (Fireworks).
As you might know and remember it works with vector graphic information but can write bitmap PNG files.
You can use all sorts of lines, colors and gradients to get very good results.
I'll give it a try.

Here is an attempt to approach and mimic the pattern



Perhaps this is usable to texture map the part?
[/quote]

Created a mock-up for this part some time ago, maybe you can use it in the meantime?

RE: Part request 4150px21 - Gerald Lasser - 2018-09-19

Jaco's drawing looks very good!
Mimicking the gradient like I did with parts/4589552b.dat is still quite some work... May be subparting

RE: Part request 4150px21 - Knud Ahrnell Albrechtsen - 2018-09-20

(2018-09-19, 16:51)Evert-Jan Boer Wrote:
(2018-09-19, 10:50)Jaco van der Molen Wrote: Jaco van der Molen
[quote pid='29393' dateline='1537350396']
Yeah, gradients Sad
And beeing silver printed, not sure that texmap will provide a good result. Anyway, here is a pretty good image I found:
Quote:OK, I can try to redraw it in my graphics program (Fireworks).
As you might know and remember it works with vector graphic information but can write bitmap PNG files.
You can use all sorts of lines, colors and gradients to get very good results.
I'll give it a try.

Here is an attempt to approach and mimic the pattern



Perhaps this is usable to texture map the part?

Created a mock-up for this part some time ago, maybe you can use it in the meantime?
[/quote]

Thanks Smile

RE: Part request 4150px21 - Jaco van der Molen - 2018-09-20

(2018-09-19, 21:37)YGerald Lasser Wrote: Jaco's drawing looks very good!
Mimicking the gradient like I did with parts/4589552b.dat is still quite some work... May be subparting

Thanks. Feel free to used it.

RE: Part request 4150px21 - Martin Latta - 2019-03-23

Hello, is this part going to be a part of official LDraw library? Or at least unofficial library?

RE: Part request 4150px21 - Knud Ahrnell Albrechtsen - 2020-12-10

Somehow im starting to get a strange error with this element.

In LDcad it is shown like this:



[Image: pic01.png]


[Image: pic02.png]




In LPub3D it is on the model shown the same:

[Image: pic03.png]



but the partlist is shown correct:

[Image: pic04.png]



How come i see thie behavior?

RE: Part request 4150px21 - Magnus Forsberg - 2020-12-10

The file attached here in this forum thread, 4150p08, is using the same partnumber as the unofficial file 4150p08 found in the Part Tracker.
Please change the number on the file downloaded from the forum to something like 4150p08_mockup.dat

RE: Part request 4150px21 - Knud Ahrnell Albrechtsen - 2020-12-10

(2020-12-10, 16:31)Magnus Forsberg Wrote: The file attached here in this forum thread, 4150p08, is using the same partnumber as the unofficial file 4150p08 found in the Part Tracker.
Please change the number on the file downloaded from the forum to something like 4150p08_mockup.dat

Thanks
That did the trick.
Any chance this part will be made official ??

RE: Part request 4150px21 - Magnus Forsberg - 2020-12-10

Now uploaded to the Part Tracker as 4150p0a.dat

[Image: 4150p0a.png]

https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/4150p0a.dat

This needs a different pattern code. It is a Star Wars pattern.

RE: Part request 4150px21 - Knud Ahrnell Albrechtsen - 2020-12-11

(2020-12-10, 20:54)Magnus Forsberg Wrote: Now uploaded to the Part Tracker as 4150p0a.dat

[Image: 4150p0a.png]

https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/4150p0a.dat

This needs a different pattern code. It is a Star Wars pattern.

Thanks Smile

RE: Part request 4150px21 - Magnus Forsberg - 2020-12-11

Sorry 'bout this. It's now been renumbered to 4150psc.dat

https://www.ldraw.org/cgi-bin/ptdetail.cgi?s=4150psc.dat

Plese delete any copy of 4150p0a you've downloaded.