Complete Couple more part requests

[Complete] Couple more part requests - Printable Version

+- LDraw.org Discussion Forums (https://forums.ldraw.org)
+-- Forum: Models and Parts (https://forums.ldraw.org/forum-18.html)
+--- Forum: Part Requests (https://forums.ldraw.org/forum-30.html)
+--- Thread: [Complete] Couple more part requests (/thread-22743.html)

Couple more part requests - Orion Pobursky - 2018-03-06

I'd try to do these myself but my time to work on these things is very limited. Anyway:

87079pr0012 Tile 2 x 4 with Brickheadz Seasonal Calendar print
32606 Friends Accessories Flower with 7 Thick Petals and Pin

RE: Couple more part requests - Johann Eisner - 2018-03-06

(2018-03-06, 15:43)Orion Pobursky Wrote: I'd try to do these myself but my time to work on these things is very limited. Anyway:

87079pr0012 Tile 2 x 4 with Brickheadz Seasonal Calendar print
32606 Friends Accessories Flower with 7 Thick Petals and Pin

Hi Orion

I would try this one:
87079pr0012 Tile 2 x 4 with Brickheadz Seasonal Calendar print

Where can I get a picture from the front side?

RE: Couple more part requests - Philippe Hurbain - 2018-03-06

Quote:Where can I get a picture from the front side?

Should be good enough... (Photoshoped from https://www.youtube.com/watch?v=xLQ5bC-nsRk )

I would have a try with the flower if I had the part (or many photos...)

RE: Couple more part requests - Damien Roux - 2018-03-06

(2018-03-06, 19:21)Johann Eisner Wrote:
(2018-03-06, 15:43)Orion Pobursky Wrote: I'd try to do these myself but my time to work on these things is very limited. Anyway:

87079pr0012 Tile 2 x 4 with Brickheadz Seasonal Calendar print
32606 Friends Accessories Flower with 7 Thick Petals and Pin

Hi Orion

I would try this one:
87079pr0012 Tile 2 x 4 with Brickheadz Seasonal Calendar print

Where can I get a picture from the front side?

You can take 87079pz1 as an example, there is already a sub part for the Brickheadz logo on the left.

Also, as I’m working on all Brickheadz parts, I can do it myself if you prefer, just let me know.

RE: Couple more part requests - Orion Pobursky - 2018-03-06

(2018-03-06, 19:41)Philippe Hurbain Wrote:
Quote:Where can I get a picture from the front side?
Should be good enough... (Photoshoped from https://www.youtube.com/watch?v=xLQ5bC-nsRk )

I would have a try with the flower if I had the part (or many photos...)

Photos are easy. I'll try to have them up shortly.

RE: Couple more part requests - Gerald Lasser - 2018-03-06

(2018-03-06, 19:41)Philippe Hurbain Wrote:
Quote:Where can I get a picture from the front side?
Should be good enough... (Photoshoped from https://www.youtube.com/watch?v=xLQ5bC-nsRk )

I would have a try with the flower if I had the part (or many photos...)

I have got the flower, I can get you some photos. I thought I have seen it on digital bricks, but I can't find it now...

RE: Couple more part requests - Orion Pobursky - 2018-03-07

(2018-03-06, 21:53)Orion Pobursky Wrote:
(2018-03-06, 19:41)Philippe Hurbain Wrote: Should be good enough... (Photoshoped from https://www.youtube.com/watch?v=xLQ5bC-nsRk )

I would have a try with the flower if I had the part (or many photos...)

Photos are easy. I'll try to have them up shortly.

RE: Couple more part requests - Philippe Hurbain - 2018-03-07

(2018-03-07, 0:08)Orion Pobursky Wrote:
(2018-03-06, 21:53)Orion Pobursky Wrote: Photos are easy. I'll try to have them up shortly.

Thanks for the photos. One thing not totally clear from them: what's the sequence of petal height? Is there a left-right symmetry somewhere?

RE: Couple more part requests - Gerald Lasser - 2018-03-07

(2018-03-07, 9:00)Philippe Hurbain Wrote: Thanks for the photos. One thing not totally clear from them: what's the sequence of petal height? Is there a left-right symmetry somewhere?

There's one petal that stands for itself, Orion did not make a picture of that one.

It is slanted in a way. If this petal faces you, it is slanted upwards from right to left.
Then it continues (clockwise): Low, High, Low, High, Low High.

so three, different petals.

RE: Couple more part requests - Johann Eisner - 2018-03-07

(2018-03-07, 0:08)Orion Pobursky Wrote:
(2018-03-06, 21:53)Orion Pobursky Wrote: Photos are easy. I'll try to have them up shortly.

Thanks for the photo.

RE: Couple more part requests - Johann Eisner - 2018-03-07

(2018-03-06, 19:41)Philippe Hurbain Wrote:
Quote:Where can I get a picture from the front side?
Should be good enough... (Photoshoped from https://www.youtube.com/watch?v=xLQ5bC-nsRk )

I would have a try with the flower if I had the part (or many photos...)

Thanks for the photo.

RE: Couple more part requests - Johann Eisner - 2018-03-07

(2018-03-06, 21:19)Damien Roux Wrote:
(2018-03-06, 19:21)Johann Eisner Wrote: Hi Orion

I would try this one:
87079pr0012 Tile 2 x 4 with Brickheadz Seasonal Calendar print

Where can I get a picture from the front side?

You can take 87079pz1 as an example, there is already a sub part for the Brickheadz logo on the left.

Also, as I’m working on all Brickheadz parts, I can do it myself if you prefer, just let me know.

I think, you mean 87079pz0.
This is a very good template.
If you do not care, then I'll do the work.

Regards Johann

RE: Couple more part requests - Damien Roux - 2018-03-07

(2018-03-07, 11:25)Johann Eisner Wrote:
(2018-03-06, 21:19)Damien Roux Wrote: You can take 87079pz1 as an example, there is already a sub part for the Brickheadz logo on the left.

Also, as I’m working on all Brickheadz parts, I can do it myself if you prefer, just let me know.

I think, you mean 87079pz0.
This is a very good template.
If you do not care, then I'll do the work.

Regards Johann

87079pz0, sorry.
You can do the job, of course!

RE: Couple more part requests - Philippe Hurbain - 2018-03-07

Thanks, Gerald!

RE: Couple more part requests - Gerald Lasser - 2018-03-07

Here's the slanted petal

RE: Couple more part requests - Philippe Hurbain - 2018-03-09

Progressing...

RE: Couple more part requests - Philippe Hurbain - 2018-03-09

...done! http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/32606.dat

RE: Couple more part requests - Johann Eisner - 2018-03-10

(2018-03-06, 19:41)Philippe Hurbain Wrote:
Quote:Where can I get a picture from the front side?
Should be good enough... (Photoshoped from https://www.youtube.com/watch?v=xLQ5bC-nsRk )

I would have a try with the flower if I had the part (or many photos...)

After a long night....
http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/87079pz4.dat

RE: Couple more part requests - Orion Pobursky - 2018-03-10

(2018-03-06, 15:43)Orion Pobursky Wrote: I'd try to do these myself but my time to work on these things is very limited. Anyway:

87079pr0012 Tile 2 x 4 with Brickheadz Seasonal Calendar print
32606 Friends Accessories Flower with 7 Thick Petals and Pin

You guys rock. Thanks!

RE: Couple more part requests - Luke Arts - 2021-04-06

(2018-03-06, 15:43)Orion Pobursky Wrote: I'd try to do these myself but my time to work on these things is very limited. Anyway:

87079pr0012 Tile 2 x 4 with Brickheadz Seasonal Calendar print
32606 Friends Accessories Flower with 7 Thick Petals and Pin

The part that was created and is currently in the LDraw library is WRONG. The actual (real life) part does not have such high differences between the petals.
Check the official images from Lego:
https://www.lego.com/cdn/product-assets/element.img.lod5photo.192x192/6182260.jpg
etc.
There are some very subtle height differences between the petals, and some slanting, but this model shows a difference of more than the petal thickness! This makes it unusable because it generates collisions where in real life none exist.

RE: Couple more part requests - Luke Arts - 2021-04-08

(2018-03-09, 13:52)Philippe Hurbain Wrote: ...done! http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/32606.dat

please rework to match the real item. see my previous post in thread.

RE: Couple more part requests - Philippe Hurbain - 2021-04-08

(2021-04-06, 13:03)Luke Arts Wrote: The part that was created and is currently in the LDraw library is WRONG. The actual (real life) part does not have such high differences between the petals.
Check the official images from Lego:
https://www.lego.com/cdn/product-assets/element.img.lod5photo.192x192/6182260.jpg
etc.
There are some very subtle height differences between the petals, and some slanting, but this model shows a difference of more than the petal thickness! This makes it unusable because it generates collisions where in real life none exist.

Problem is that I have no better reference and I don't want to modify it for a result that could prove wrong too... Maybe you could turn off collision detection on this one?

RE: Couple more part requests - Philippe Hurbain - 2021-04-11

32606 flower has been updated. Many thanks to Magnus who provided dimentional information and quick checked my draft.
https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/32606.dat