Top 30 LDraw parts authors - Printable Version +- LDraw.org Discussion Forums (https://forums.ldraw.org) +-- Forum: Administrative (https://forums.ldraw.org/forum-4.html) +--- Forum: Website Suggestions/Requests/Discussion (https://forums.ldraw.org/forum-23.html) +--- Thread: Top 30 LDraw parts authors (/thread-2177.html) |
Top 30 LDraw parts authors - Steffen - 2011-12-08 In lugnet.cad, Philippe Hurbain wrote: > I'm said to be a prolific parts author, so I wanted to verify the truth > behind... A few find in files, some Excel work and a bit of manual cleaning > gives the result below. This was done on the full collection of official LDraw > parts + unofficial ones up to march 2011. > > Have fun! > > Philo source: http://www.lugnet.com/cad/?n=17710 PS I took this from Google's cached version of the site, as lugnet currently seems to be down Re: Top 30 LDraw parts authors - Tim Gould - 2011-12-08 Since lugnet is back up for a bit... Code: 'm said to be a prolific parts author, so I wanted to verify the truth Re: Top 30 LDraw parts authors - Steffen - 2012-09-24 I was curious again and updated the list above to the most recent parts update 2012-02, counting the Author: lines in the \p, \parts and \parts\s files: Code: Philippe Hurbain [Philo] 921 Re: Top 30 LDraw parts authors - Philippe Hurbain - 2012-09-25 Imho you should only count in parts folder... Re: Top 30 LDraw parts authors - Steffen - 2012-09-26 Counting only the \PARTS folder of our parts collection up to and including parts update 2012-02 yields as top-30-authors: Code: James Jessiman 679 Re: Top 30 LDraw parts authors - Steffen - 2013-08-11 Counting only the \PARTS folder of our parts collection up to and including parts update 2013-01 yields as top-30-authors: Code: Philippe Hurbain 698 Re: Top 30 LDraw parts authors - Travis Cobbs - 2013-08-12 Congratulations Philo on surpassing James. 139 new files in the latest update seems like a lot even for you. Re: Top 30 LDraw parts authors - Santeri Piippo - 2013-08-12 I'm still that far down..? oh well, my parts are way more complex than your puny bricks and patterns anyway. Re: Top 31 LDraw parts authors - Steffen - 2013-12-24 Counting only the \PARTS folder of our parts collection up to and including parts update 2013-02, and leaving out all trivial "=" alias and "~moved to" files yields as top-31-authors: Code: Philippe Hurbain 857 EDIT: re-counted numbers by leaving out trivial "=" aliases and "~moved to" files. Re: Top 30 LDraw parts authors - Rolf Osterthun - 2013-12-24 Hey Steffen, thanks for the analysis. But I have one suggestion for improvement: In my opinion the alias files should not have the same weight like the original files (suggestion alias weight=0). Rolf Re: Top 30 LDraw parts authors - Steffen - 2013-12-24 oh, definitely. will re-count. also have to leave out moved-to's. by the way, the counting is just for fun. this is not a race. and: modeling 1 complex part can be much more difficult than 10 easy ones. so please nobody misunderstand my post. Re: Top 30 LDraw parts authors - Michael Heidemann - 2013-12-24 Maybe also the number of lines should be taken into consideration, as a more complex part would have more lines (subparts inlined). Re: Top 30 LDraw parts authors - Steffen - 2013-12-24 ugh, I didn't want to make this academic research... and also doing that line count may lead to the effect that people think "more lines is better". it is not. the art is, as in programming, to create the same geometry with as _few_ lines as possible... so for now I will just stick to simply counting files, leaving out the trivial aliases and moved-to's. I find this a reasonable way of counting, as each part file represents an entity you can build with, regardless if it is complex or not. Re: Top 30 LDraw parts authors - Michael Horvath - 2013-12-24 Yeah, James is going to have to work hard to catch up again. Re: Top 30 LDraw parts authors - Santeri Piippo - 2013-12-24 Gah, I really need to stop specializing in Bionicle parts and find some easy patterns to do in 10 minutes. :p Michael Horvath Wrote:Yeah, James is going to have to work hard to catch up again.... :| Re: Top 30 LDraw parts authors - Tim Gould - 2013-12-24 FYI I split this off to a new topic. I got very confused scrolling down the top 30 part authors only to find completely unrelated comments about forum tags Re: Top 30 LDraw parts authors - Michael Horvath - 2013-12-24 There should be a separate count for the number of polygons created. Re: Top 30 LDraw parts authors - Max Martin Richter - 2013-12-25 Lets count the polygons on a detailed 48x48 baseplate... :-) /Max Re: Top 30 LDraw parts authors - Michael Heidemann - 2013-12-25 That' a good point for _not_ counting polygons Let's count the part files like Steffen suggests. I feel thats a good compromize . I am sure that half of my parts are now out of the race Re: Top 30 LDraw parts authors - Steffen - 2013-12-25 I've re-counted and updated the numbers above. Re: Top 30 LDraw parts authors - Michael Horvath - 2013-12-26 Michael Heidemann Wrote:Maybe also the number of lines should be taken into consideration, as a more complex part would have more lines (subparts inlined). This sounds OK. Re: Top 30 LDraw parts authors - Michael Heidemann - 2013-12-26 We have already thrown away this idea as a good part author can use less lines and that should be our goal Re: Top 30 LDraw parts authors - Chris Dee - 2013-12-26 Agreed. I once worked in a programming team where it was suggested (by management) that performance should be measured in terms of number of lines of code produced. A very BAD idea that was quickly abandoned. Re: Top 30 LDraw parts authors - Michael Horvath - 2013-12-26 Michael Heidemann Wrote:We have already thrown away this idea as a good part author can use less lines and that should be our goal Then we must rank people by the fewest number of lines used. Re: Top 30 LDraw parts authors - Steffen - 2013-12-27 yes, same here. that always leads to bloating and copy+paste instead of unifying. the result is a terrible pile of baby code. a typical, frequent error done by managers who never have programmed and measure code like they measure trainloads of coal: by sheer counting. top 30 LDraw parts authors up to and including update 2015-01 - Steffen - 2015-12-21 Counting only the \PARTS folder of our parts collection up to and including parts update 2015-01, and leaving out all trivial "=" alias and "~moved to" files yields as top-30-authors: Code: Philippe Hurbain 1258 This counting is just for fun - part authoring is not a race. And: modeling 1 complex part can be much more difficult than 10 easy ones, of course. Re: top 30 LDraw parts authors up to and including update 2015-01 - Willy Tschager - 2015-12-22 What impresses me most is the number of people we lost on the way! w. PS. Who is this Philippe Hurbain guy at the top? Re: top 30 LDraw parts authors up to and including update 2015-01 - Santeri Piippo - 2015-12-31 Uh oh. I'm gonna fall off the list soon! Gotta drop out of university to work on more LDraw parts. top 30 LDraw parts authors up to and including update 2018-02 - Steffen - 2018-12-20 Here is an update of the statistics up to and including parts update 2018-02. As said above: This counting is just for fun - part authoring is not a race: Modeling 1 complex part can be much more difficult than 10 easy ones. With update 2018-02, we have exactly 11000 files in the PARTS folder. Not counting "=" aliases and "~moved to" files, 9924 real PARTS files remain. Counting the authors of those yields these top-30-authors: Code: 1851 Philippe Hurbain [Philo] RE: top 30 LDraw parts authors up to and including update 2018-02 - Philippe Hurbain - 2018-12-20 RE: top 30 LDraw parts authors up to and including update 2018-02 - Michael Heidemann - 2018-12-20 I am still in the top ten - great top 30 LDraw parts authors up to and including update 2019-03 - Steffen - 2019-12-29 Here is an update of the statistics up to and including parts update 2019-03. As said above: This counting is just for fun - part authoring is not a race: Modeling 1 complex part can be much more difficult than 10 easy ones. With update 2019-03, we have 12255 files in the PARTS folder. Not counting "=" aliases and "~moved to" files, 11106 real PARTS files remain. Counting the authors of those yields these top-30-authors: Code: 2173 Philippe Hurbain [Philo] RE: top 30 LDraw parts authors up to and including update 2019-03 - Steffen - 2020-07-06 Here is an update of the statistics up to and including parts update 2020-01. As said above: This counting is just for fun - part authoring is not a race: Modeling 1 complex part can be much more difficult than 10 easy ones. With update 2020-01, we have 12698 files in the PARTS folder. Not counting "=" aliases and "~moved to" files, 11526 real PARTS files remain. Counting the authors of those yields these top-30-authors: Code: 2348 Philippe Hurbain [Philo] top 30 LDraw parts authors up to and including update 2020-02 - Steffen - 2020-09-13 Here is an update of the statistics up to and including parts update 2020-02. As said above: This counting is just for fun - part authoring is not a race: Modeling 1 complex part can be much more difficult than 10 easy ones. With update 2020-02, we have 13207 files in the PARTS folder. Not counting "=" aliases and "~moved to" files, 12016 real PARTS files remain. Counting the authors of those yields these top-30-authors: Code: 2437 Philippe Hurbain [Philo] RE: top 30 LDraw parts authors up to and including update 2020-02 - Gerald Lasser - 2020-09-13 Always amazing to see Philo's list! You need to make one of the parts that are still on the PT, who's got most in the backlog :-) RE: top 30 LDraw parts authors up to and including update 2020-02 - Orion Pobursky - 2020-09-13 (2020-09-13, 15:41)Gerald Lasser Wrote: Always amazing to see Philo's list! Working on it. I've written code to database the library info so pulling this information shouldn't be too hard. RE: top 30 LDraw parts authors up to and including update 2020-02 - Magnus Forsberg - 2020-09-13 Here's an image of the numbers: RE: top 30 LDraw parts authors up to and including update 2019-03 - N. W. Perry - 2020-09-14 …and I am very pleased to have five humble parts in the official library. :-) (So far mostly patterns and little geometric tweaks to existing parts. I have yet to create a completely new part, other than stickers, but my re-build of 4208 is my first real attempt at building new geometry.) RE: top 30 LDraw parts authors up to and including update 2020-02 - Willy Tschager - 2020-09-14 The first number in front of Philo's part count is clearly an error. Would you please just delete it w. |