+- LDraw.org Discussion Forums (https://forums.ldraw.org)
+-- Forum: Models and Parts (https://forums.ldraw.org/forum-18.html)
+--- Forum: Part Requests (https://forums.ldraw.org/forum-30.html)
+--- Thread: Monorail Track Points (/thread-17151.html)
Monorail Track Points - Damien Roux - 2015-09-01
Hi there,
I'm planning to render the Unitron sets.
Appart form stickers that I can create, the only parts missing are the two Monorail Track Points
2890 - Monorail Track Point Left
2889 - Monorail Track Point Right
![[Image: mzPWSVPMpn768Y1khMRQtfw.jpg]](http://thumbs4.ebaystatic.com/d/l225/m/mzPWSVPMpn768Y1khMRQtfw.jpg)
I know the parts are quite complexe but I would love if someone could author them.
Thanks a lot.
Re: Monorail Track Points - Damien Roux - 2015-09-05
No volonteer?
Re: Monorail Track Points - Philippe Hurbain - 2015-09-05
Very complex, and don't have the part...
Re: Monorail Track Points - Magnus Forsberg - 2015-09-06
![[Image: right_at_curved.jpg]](http://www.brickshelf.com/gallery/whoward69/Monorail/parts/right_at_curved.jpg)
Don't know if it'll help anyone, but I found some pictures of the inside structure here and here
Who is whoward69?
To me, it looks like he might have been working on these points, but the pictures are uploaded ten years ago.
Re: Monorail Track Points - Ronald Vallenduuk - 2015-09-06
Whoward69 = William Howard [WilliamH]
I think he's worked on other train parts as well.
Re: Monorail Track Points - Chris Dee - 2015-09-07
Yes, William did a lot of research on the monorail points and was an active author at one time. Thanks for re-location those photos. The internal wheel (2884) and 'shover' (2991) are already in the official library.
Re: Monorail Track Points - Magnus Forsberg - 2015-09-07
Didn't know that. Actually, I can find four parts.
2884.dat, ~Monorail Points Inner Wheel
2890.dat, ~Monorail Points Rack Shover
2883.dat, ~Monorail Points Shover
2911.dat, ~Monorail Track Points Interior Shover
Re: Monorail Track Points - Chris Dee - 2015-09-07
Oh, yes. It looks like they need standardised naming - I suggest Monorail Track Points ...
Re: Monorail Track Points - Damien Roux - 2015-09-07
Thats a good suggestion.
I would love to continue his work but I don't own the parts. I will maybe try to do something based on to the pictures.
But if someone is ready to work on that part, please do it!
RE: Monorail Track Points - Nathan S - 2017-08-13
(2015-09-01, 5:37)Damien Roux Wrote: Hi there,
I'm planning to render the Unitron sets.
Appart form stickers that I can create, the only parts missing are the two Monorail Track Points
2890 - Monorail Track Point Left
2889 - Monorail Track Point Right
I know the parts are quite complexe but I would love if someone could author them.
Thanks a lot.
*bump*
Thoughts??
RE: Monorail Track Points - Mikkel Bech Jensen - 2018-10-03
I really hoped someone else would take on this project, but after a long time I finally decided to do it myself
I have modelled from the real parts I own and the pictures uploaded by William Howard, so there are inner details as well - and it was super helpfull that there already are some of the inner mechanics on the official library. I'm currently waiting for a reply from Chris Dee to upload the updated versions of '2891' and '2892' (short monorail curved tracks) as I have reworked the subfiles for those to work woth this part.I however have a problem with the numbering. William Howard uses some numbers that don't believe are correct on his pictures. For example, he numbers the top and bottom assembly parts as '2880' and '2881', but these numbers are the numbers of two unrelated parts already on the official library? Also one of the inner mechanical parts "2890.dat, ~Monorail Points Rack Shover" (already made by someone else and accepted to the official library) has the same number as the complete assembly part of the monorail left track point should have according to bricklink and peeron? There has to be a mistake here? Should I just number the parts as an unknown number with 'uNNNN.dat' and get Chris Dee to upload a new version of '2890.dat'? What about the part in the official library? They may have wrong numbers all of them.
I asked the same question to the part admin mail (Chris Dee) while asking him to upload the above mentioned part rework. But it has been a couple of days and he has not answered. I guess it is because I should have asked the question on the forum in the first place
![[Image: unitron_monorail_without_stickers.png]](http://www.brickshelf.com/gallery/gaia25/LM/unitron_monorail_without_stickers.png)
RE: Monorail Track Points - Mikkel Bech Jensen - 2018-10-03
So now you can make the Unitron stickers Damien!
RE: Monorail Track Points - Magnus Forsberg - 2018-10-03
I think Howard was right in all his pictures. The partnumbers seem correct.
Official files 2880 and 2881 are both Move to-files, moving and renumbering incorrect parts number usage.
I think the solution here would be to simply use a a-suffix to those numbers.
2880a.dat and 2881a.dat.
I belive that the numbers on the complete parts used by Bricklink and Peeron are wrong.
The complete assembly could maybe be something like:
2881c01.dat, Monorail Point Right
2886c01.dat, Monorail Point Left
But I'm sure Chris will have a good answer to this.
RE: Monorail Track Points - Willy Tschager - 2018-10-03
Chapeau! Very impressed by your work!!
w.
RE: Monorail Track Points - Philippe Hurbain - 2018-10-03
(2018-10-03, 15:45)Magnus Forsberg Wrote: I think Howard was right in all his pictures. The partnumbers seem correct.
Official files 2880 and 2881 are both Move to-files, moving and renumbering incorrect parts number usage.
I think the solution here would be to simply use a a-suffix to those numbers.
2880a.dat and 2881a.dat.
I belive that the numbers on the complete parts used by Bricklink and Peeron are wrong.
The complete assembly could maybe be something like:
2881c01.dat, Monorail Point Right
2886c01.dat, Monorail Point Left
But I'm sure Chris will have a good answer to this.
Yes, the part numbers are OK. Right switch assembled is 74780, left switch is 74781.
RE: Monorail Track Points - Philippe Hurbain - 2018-10-03
(2018-10-03, 17:46)Willy Tschager Wrote: Chapeau! Very impressed by your work!!Yes indeed! Loooong time missing parts!
RE: Monorail Track Points - Mikkel Bech Jensen - 2018-10-04
I have uploaded the parts now! But it still requires some subfiles that Chris needs to upload for me. Those subfiles are reworked versions of the short monorail track curves, so remember to download them as soon as they are up!
RE: Monorail Track Points - Damien Roux - 2018-10-13
(2018-10-03, 14:33)Mikkel Bech Jensen Wrote: So now you can make the Unitron stickers Damien!
Yeah, I haven't done ldraw stuff for some time, but I think this will be a good opportunity to start again.
Thanks for the job!