LDraw.org Discussion Forums

Hi all,

Is this made?
https://brickset.com/parts/design-14181

Its been around since 2010, but I can only find an "old" version of this "Wing 4 x 9" without stud notches, part 2413.

Or does it have, like many parts, an alternative part number?

Working on it...

(2017-06-07, 18:06)Philippe Hurbain Wrote: [ -> ]Working on it...

Have you seen this article at New Elementary?

(2017-06-07, 19:28)Philippe Hurbain Wrote: [ -> ]Working on it...

Have you seen this article at New Elementary?

Great!

Interesting article.

(2017-06-07, 19:28)Magnus Forsberg Wrote: [ -> ]

(2017-06-07, 18:06)Philippe Hurbain Wrote: [ -> ]Working on it...

Have you seen this article at New Elementary?

Forgot about it... Thanks, it confirms that LDD model is wrong (it misses the rounded tip corners)

Done... http://www.ldraw.org/cgi-bin/ptdetail.cg.../14181.dat
Always amazed that a useful part like this was not requested before!

(2017-06-08, 6:52)Philippe Hurbain Wrote: [ -> ]

(2017-06-07, 19:28)Magnus Forsberg Wrote: [ -> ]Have you seen this article at New Elementary?

Forgot about it... Thanks, it confirms that LDD model is wrong (it misses the rounded tip corners)

Your rounded corners appear to be misaligned:



Furthermore, where you have a protrusion from the top edge to make the stud hole on the right, the pictures on New Elementary imply the opposite (a thinning of the top edge). I don't have the part in hand to see what it really looks like, although I suspect that I do own it.

Thanks, I'll have a closer look!

(2017-06-08, 19:02)Philippe Hurbain Wrote: [ -> ]Done... http://www.ldraw.org/cgi-bin/ptdetail.cg.../14181.dat
Always amazed that a useful part like this was not requested before!

Thanks Philo.
Amazing indeed since this notched version of this wing has been there since 2010!
I absolutely need this version since the none-notched version does not fit in my model :-)

(2017-06-08, 19:33)Travis Cobbs Wrote: [ -> ]Furthermore, where you have a protrusion from the top edge to make the stud hole on the right, the pictures on New Elementary imply the opposite (a thinning of the top edge). I don't have the part in hand to see what it really looks like, although I suspect that I do own it.

Corrected the rounded corner, but I let the notch as in LDD model since a stud fits properly the notch, and I didn't know the exact shape anyway.